Practical guides
Microcontroller Restarts: Supply Dip or Something Else?
Compare the reset marker and local logic rail while a small development board is already running.
Read the guide →Low-voltage electronics · Clear signals
Make sense of bandwidth, sampling and two-channel measurements before choosing a handheld oscilloscope. Explore the FNIRSI 2C53P and practical low-voltage measurement guides.
Practical guides
Compare the reset marker and local logic rail while a small development board is already running.
Read the guide →Practical guides
Separate an input waveform, missing logic supply and wrong translator direction on a low-voltage board.
Read the guide →Practical guides
Follow the enable, output and status sequence on a documented low-voltage regulator board.
Read the guide →Practical guides
Use two traces to check whether the intended SPI peripheral was selected when the clock burst arrived.
Read the guide →Practical guides
Capture a switch input during one press and separate contact bounce from repeated presses reported by firmware.
Read the guide →Practical guides
Compare a logic command and servo supply during a small movement on a safe test bench.
Read the guide →Practical guides
Use a reference signal to separate a probe or setup mistake from an unfamiliar reading on a BSIDE OT3.
Read the guide →Practical guides
Compare the two FNIRSI models by screen, controls and the limits that matter on a crowded low-voltage bench.
Read the guide →Practical guides
Review the FNIRSI 2C53P as a combined oscilloscope, multimeter and signal generator. Match each function, operating mode and supplied probe to the low-voltage task you need to p...
Read the guide →Practical guides
Decide whether a vehicle measurement needs an oscilloscope, OBD reader or multimeter. Check signal levels, grounding and the exact instrument limits before connecting it.
Read the guide →Practical guides
Use two oscilloscope inputs to compare related signals. Check timing, sampling and probe connections, and confirm the instrument limitations before connecting either channel.
Read the guide →Practical guides
Understand how bandwidth and sample rate affect a handheld oscilloscope measurement. Check the actual channel mode, probes and input limits before choosing an instrument.
Read the guide →