DigitalOsc guides
CD4060 Divider Has No Output: Reset, Divider Stage or Oscillator?
DigitalOsc editorial team · Updated 21 November 2026
A high divider stage can take a long time to change. Before concluding that a CD4060 oscillator stopped, check reset and choose an output whose expected period fits your observation window.
Read the part and chosen divider output
TI describes the CD4060B as a ripple-carry binary counter with oscillator functions. Confirm the exact stage numbering, reset behaviour and external timing arrangement from the data sheet. An output label is not a frequency in hertz. Its rate depends on the actual oscillator and division stage; a guessed timing-component formula is not a substitute for the exact documented circuit.
Choose an accessible buffered output first
Use a suitable safe low-voltage setup and inspect a documented counter output rather than immediately attaching a probe to the sensitive oscillator network. Probe capacitance can change an oscillator’s behaviour. ScopeBench’s crystal-probing guide covers that broader measurement problem; here the initial goal is to establish activity at a buffered divider stage while keeping the source undisturbed.
Allow for the division time
Select a timebase and observation interval consistent with the selected stage. A faster lower-stage output and a slowly changing higher stage can both be normal. In a controlled illustrative divider, repeated division by two produces progressively longer periods; consult the actual stage definition before assigning a ratio. A screen that looks flat for a fraction of the expected period is not evidence that the counter failed.
Use reset and output as a bounded pair
If activity remains absent, compare reset and the chosen output during a documented start condition using appropriate common-reference probes. A held reset can explain missing divided output while leaving the oscillator question unresolved. A two-channel scope preserves that pair; one channel can inspect a steady repeating stage if the source is stable. Save the stage, reset state, timing network and observation length before replacing the IC or disturbing the oscillator.
Choose a handheld for this question
The BSIDE OT3 offers one channel, 10 MHz and up to 48 MSa/s. It may suit a repeating single-node check within its actual limits. Consider the two-input 2C53P only when the question needs a simultaneous comparison; use equipment you already own when it answers the task.
- Check the exact 2C53P listing
- Compare the current FNIRSI and BSIDE range
- Compare 2C53P versus OT3 for your bench
DigitalOsc links to Payverza as the retailer. Confirm the exact probes, accessories, current price and delivery before purchase. This is a proposed low-voltage workflow, not an independent hardware test; a battery-powered case does not establish isolated inputs.
Sources and scope
- 4060 manufacturer or technical documentation (source snapshot 2026-11-21)
- PICO manufacturer or technical documentation (source snapshot 2026-11-21)
Examples are illustrative, not measured results. Follow the exact device and probe documentation for pinout, voltage, reference and timing limits. Recheck specifications for the version you actually own.