DigitalOsc guides
Logic Level Translator: Is the Signal Reaching Both Sides?
DigitalOsc editorial team · Updated 19 November 2026
Separate an input waveform, missing logic supply and wrong translator direction on a low-voltage board.
Name the two rails and direction
Read the exact translator data sheet and schematic. A dual-supply translator has an input and output voltage domain; check which one supplies each side and whether an enable is required. For example, the TXU0202 has fixed directions by channel. Do not treat it like an automatic or bidirectional I²C translator.
Use a slow repeated transition first
Only on a referenced, low-voltage bench board, verify both supply rails with a meter and compare one documented input and the corresponding output on the scope. In a teaching example the 3.3 V side switches repetitively, the downstream trace remains flat, and the second supply rail is missing. Fix the supply path before replacing the translator or increasing the clock. With both supplies good, check output enable, direction and whether the load has another driver.
Interpret the levels using the real receiver
Input and output can both switch with different swing; that is the point of translation. Check the thresholds and absolute limits for the actual devices on both sides. If the source direction, grounds or allowed voltage are unclear, solve that from the schematic first. A meter finds a missing rail; two channels help only when comparing which edge reaches the second domain.